Aluminum Metal Desoldering Pump Suction Soldering Sucker Pen Removal Vacuum Iron Welding Tools

Specifications: Temperature adjustment range: 1℃ Scope of application: In addition to tin Net weight: approx. 40g Length: Approximately 200mm/7.87'' Material: Semi-aluminum, Semi-plastic/All-aluminum Maximum suction: 30 Color: Blue/Gold manual: 1. Press down the piston of the solder sucker to block it. 2. Use an electric soldering iron to heat the solder joint to melt the solder. 3. Remove the soldering iron, quickly put in the resistance paste solder of the solder sucker, and press the button of the solder sucker. 4. If it is not clean once, it can be repeated many times. 1. Ensure that the piston of the solder sucker is well sealed. Before powering , hole of the solder suction with your fingers, and press the button of the solder suction . If the piston does not easily into place, it means that the seal is good.2. The size of the hole suction tin is different, choose the appropriate size.3. The suction is worn out and should be replaced with a new .4. The solder paste is immersed in a little rosin before it comes into with the solder to improve the fluidity of the solder.5. The pad is slightly longer. After the solder is melted, draw a circle with the solder joint pin as the center and extend it clockwise, and then press the solder suction button.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.Quantity : 1 pcs

• The size of the hole suction tin is different, choose the appropriate size.
• The suction is worn out and should be replaced with a new .
• The solder paste is immersed in a little rosin before it comes into with the solder to improve the fluidity of the solder.
• If the piston does not easily into place, it means that the seal is good.
• If it is not clean once, it can be repeated many times.
• Suitable for use in industrial electronic repair, circuit board welding, laboratory, assembly workshop, and production of electric soldering iron equipment for matching use.